Foam Tool Organizer for
15 Klein Screwdrivers and Nut Drivers


15 Klein Screwdrivers and Nut Drivers

Fits the screwdrivers from 8-pc set 85078 and nut drivers from 7-pc set 631.

Fits (4) slotted screwdrivers, (4) Phillips screwdrivers, and (7) inch nut drivers.


Drawer Size
11-7/8 X 17-3/4 inches


Foam Organizer for 15 Klein Screwdrivers and Nut Drivers

larger image

Foam Organizer for 15 Klein Screwdrivers and Nut Drivers

larger image

note: tools are not included

Tool List

Precision CNC-cut to fit 15 Klein tools:

screwdrivers from set 85078:
3/16 X 3 (Klein 601-3)
1/4 X 4 (Klein 600-4)
5/16 X 1-1/2 (Klein 600-1)
5/16 X 6 (Klein 602-6)
P1 X 3 (Klein 603-3)
P2 X 1-1/2 (Klein 603-1)
P2 X 4 (Klein 603-4)
P3 X 6 (Klein 603-6)

nut drivers from set 631:
3/16 X 3 (Klein 630-3/16)
1/4 X 3 (Klein 630-1/4)
5/16 X 3 (Klein 630-5/16)
11/32 X 3 (Klein 630-11/32)
3/8 X 3 (Klein 630-3/8)
7/16 X 3 (Klein 630-7/16)
1/2 X 3 (Klein 630-1/2)

Tool Notes

This tool organizer was designed to fit 2 cushion-grip sets. The cushion-grip screwdrivers are 8-pc set 85078. The cushion-grip nut drivers are 7-pc set 631.


Drawing F-05397-T.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

11-7/8 X 17-3/4 inches (inside width by inside depth)

Drawer Height

Works in most drawers, needing no more than 2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

11-5/8 X 17-3/16 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

Standard Colors

black over red color combination blue over yellow color combination black over blue color combination

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

black over yellow color combination black over green color combination black over gray color combination

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.

Free Shipping!

For orders within the contiguous 48 US states.

US flag

Made in the USA!