FoamFit Tools section divider

Foam Tool Organizer for
233 Husky Sockets with 5 Ratchets and 19 Additional Tools

see all organizers for Husky tools

Overview

233 Husky Sockets with 5 Ratchets and 19 Additional Tools

Fits (102) inch sockets, (102) metric sockets, (29) torx and screwdriver bit sockets, (5) ratchets, (10) extensions, and (9) additional tools.

Accommodates most of the sockets and drive tools from the Husky 505-pc set H505MTSPO.

Caution: Recommended for a 3-1/4 inch or deeper drawer.

New!

Drawer Size
36-5/8 X 19-1/2 inches

$131.40



FoamFit Tools section divider

Details

This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 233 Husky sockets and other tools:

(11) 1/4-drive 6-point sizes from 5/32 to 9/16
(10) 1/4-drive 12-point sizes from 3/16 to 9/16
(11) 1/4-drive 6-point deep sizes from 5/32 to 9/16
(14) 1/4-drive 6-point sizes from 3.5 to 14
(11) 1/4-drive 6-point deep sizes from 4 to 14
(5) 1/4-drive torx bit socket sizes from T9 to T25
(13) 3/8-drive 6-point sizes from 1/4 to 1
(5) 3/8-drive 8-point sizes from 1/4 to 1/2
(10) 3/8-drive 12-point sizes from 5/16 to 7/8
(10) 3/8-drive 6-point deep sizes from 5/16 to 7/8
(2) 3/8-drive spark plug socket sizes 5/8 and 13/16
(17) 3/8-drive 6-point sizes from 6 to 22
(12) 3/8-drive 12-point sizes from 9 to 19 plus 21
(12) 3/8-drive 6-point deep sizes from 8 to 19
(7) 3/8-drive hex bit sizes from 1/8 to 3/8
(9) 3/8-drive hex bit sizes from 3 to 8 and 10 to 12
(8) 3/8-drive torx bit sizes T20 to T55
(9) 3/8-drive security (tamper) torx bit sizes from T15 to T55
(3) 3/8-drive phillips screwdriver bit sizes #1, #2, #3
(3) 3/8-drive slotted screwdriver bit sizes 4, 5, 6mm
(1) 3/8-drive pozi screwdriver bit size PZ2
(12) 1/2-drive 12-point sizes from 3/8 to 1-1/16
(11) 1/2-drive 12-point deep sizes from 3/8 to 1
(14) 1/2-drive 12-point sizes from 9 to 22
(13) 1/2-drive 12-point deep sizes from 9 to 19, 21, and 22

1/4-drive full-polish 72-tooth ratchet
3/8-drive full-polish 72-tooth ratchet
1/2-drive full-polish 72-tooth ratchet
3/8-drive flex-head 72-tooth ratchet
1/2-drive flex-head 72-tooth ratchet
1/4-drive X 2 extension
1/4-drive X 3 extension
1/4-drive X 6 wobble extension
3/8-drive X 1-1/2 extension
3/8-drive X 3 extension
3/8-drive X 6 extension
3/8-drive X 6 wobble extension
1/2-drive X 3 extension
1/2-drive X 5 extension
1/2-drive X 10 wobble extension
1/4-drive to 3/8 drive adapter
3/8-drive to 1/4-drive adapter
3/8-drive to 1/2-drive adapter
1/2-drive to 3/8-drive adapter
3/8-drive X 10 breaker bar
1/2-drive X 15 breaker bar
1/4-drive universal joint
3/8-drive universal joint
1/2-drive universal joint

This tool organizer was designed to fit the sockets and drive tools from the Husky 505-pc set H505MTSPO, but does not include pockets for the pass-through sockets.

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.



Made in the USA!

Foam Organizer for 233 Husky Sockets, 5 Ratchets, and 19 Drive Tools

note: tools are not included

Drawer Size

This organizer is designed to fit a toolbox drawer with inner dimensions of:

36-5/8 X 19-1/2 inches (inside width by inside depth)

It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 36-1/8 X 18-9/16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.

Drawing

Please verify this organizer fits your tools before placing an order.

  1. Download the drawing: www.FoamFitTools.com/product/F-04599-T.pdf
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site