Foam Tool Organizer for
26 Husky Metric Crow Foot, Midget, and Flare-Nut Wrenches

Overview

26 Husky Metric Crow Foot, Midget, and Flare-Nut Wrenches

Fits (10) metric crow foot wrenches, (6) metric flare-nut wrenches, and (10) midget wrenches.

Accommodates the metric crow foot wrenches, flare-nut wrenches, and midget wrenches from the Husky 1025-pc set H1025MTS.

Drawer Size
13-1/2 X 18-1/2 inches

$42.90



Foam Organizer for 26 Husky Metric Crow Foot, Midget, and Flare-Nut Wrenches

larger image

Foam Organizer for 26 Husky Metric Crow Foot, Midget, and Flare-Nut Wrenches

larger image

note: tools are not included

Tool List

Precision CNC-cut to fit 26 Husky wrenches:

crow foot wrenches:
3/8-drive 10 mm
3/8-drive 11 mm
3/8-drive 12 mm
3/8-drive 13 mm
3/8-drive 14 mm
3/8-drive 15 mm
3/8-drive 16 mm
3/8-drive 17 mm
3/8-drive 18 mm
3/8-drive 19 mm

flare-nut wrenches:
9 X 11 (HFNW911MM)
10 X 12 (HFNW1012MM)
13 X 14 (HFNW1314MM)
15 X 17
16 X 18
19 X 21

midget wrenches:
4 mm
4.5 mm
5 mm
5.5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
11 mm

Tool Notes

This organizer was designed to fit the metric crow foot, flare-nut, and midget wrenches from the Husky 1025-pc set H1025MTS.

Drawing

Drawing F-03434-R.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Part of Collection

Organizers for Husky 1025-pc set, 52-inch toolbox #1

Drawer Size

13-1/2 X 18-1/2 inches (inside width by inside depth)

Drawer Height

Works in most drawers, needing no more than 2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

13 X 14-3/4 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

Standard Colors

black over red color combination blue over yellow color combination black over blue color combination

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

black over yellow color combination black over green color combination black over gray color combination

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.

Free Shipping!

For orders within the contiguous 48 US states.

US flag

Made in the USA!