194 Tekton Sockets with 3 Ratchets and 13 Drive Tools
Fits (84) inch sockets, (110) metric sockets, (3) ratchets, and (13) additional drive tools.
Accommodates the 1/4, 3/8, and 1/2-drive sockets and drive tools (minus case) from the Tekton 55-pc set SKT05301, 74-pc set SKT15311, 84-pc set SKT25302.
Sized to fit in the top drawer of the Tekton 36 X 24 inch tool cabinet (ORG72100 or ORG72200). Please measure your drawer before ordering.
31-7/16 X 20-7/16 inches
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 210 Tekton sockets and other tools:
(11) 1/4-drive deep 6-point sizes from 5/32 to 9/16
(11) 1/4-drive 6-point sizes from 5/32 to 9/16
(13) 1/4-drive deep 6-point sizes from 4 to 14
(13) 1/4-drive 6-point sizes from 4 to 14
1/4-drive 90-tooth quick-release ratchet (Tekton SRH11006)
1/4-drive 6 inch spinner handle
1/4-drive X 3 extension bar (Tekton SHA01103)
1/4-drive X 6 extension bar (Tekton SHA01106)
1/4-drive universal joint (Tekton SHA02100)
1/4-drive hex bit holder (Tekton SHA05102)
(15) 3/8-drive deep 6-point sizes from 1/4 to 1 inch
(15) 3/8-drive 6-point sizes from 1/4 to 1 inch
(19) 3/8-drive deep 6-point sizes from 6 to 24
(19) 3/8-drive 6-point sizes from 6 to 24
3/8-drive 90-tooth quick-release ratchet (Tekton SRH11108)
3/8-drive 18 inch breaker bar (Tekton SBH00118)
3/8-drive X 3 extension bar (Tekton SHA11103)
3/8-drive X 6 extension bar (Tekton SHA11106)
3/8-drive universal joint (Tekton SHA12101)
(16) 1/2-drive deep 6-point sizes from 3/8 to 1-5/16 inch
(16) 1/2-drive 6-point sizes from 3/8 to 1-5/16 inch
(23) 1/2-drive deep 6-point sizes from 10 to 32
(23) 1/2-drive 6-point sizes from 10 to 32
1/2-drive 90-tooth quick-release ratchet (Tekton SRH11210)
1/2-drive 18 inch breaker bar (Tekton SBH00218)
1/2-drive X 3 extension bar (Tekton SHA21103)
1/2-drive X 10 extension bar (Tekton SHA21110)
1/2-drive universal joint (Tekton SHA22102)
This tool organizer was designed to fit the 1/4, 3/8, and 1/2-drive sockets and drive tools from the Tekton 55-pc set SKT05301, 74-pc set SKT15311, and 84-pc set SKT25302.
31-7/16 X 20-7/16 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 30-11/16 X 20 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.