FoamFit Tools section divider

Foam Tool Organizer for
39 Craftsman Hex Bit and Torx Sockets with 5 Ratchets and 15 Drive Tools

see all organizers for ratchets and drive tools


39 Craftsman Hex Bit and Torx Sockets with 5 Ratchets and 15 Drive Tools

Fits (5) ratchets, (8) extensions, (3) adapters, (3) universal joints, (1) flex handle, (17) hex bit sockets, (16) torx sockets, and (6) screwdriver bit sockets.

Only fits newer tools without USA markings.


Drawer Size
22-1/4 X 16-1/4 inches


FoamFit Tools section divider


This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 59 Craftsman sockets and drive tools:

(5) 1/4-drive hex bit sizes from 3/16 to 3/8
(3) 1/4-drive Torx screwdriver bits from T15 to T25
(3) external torx sockets from E6 to E8
(6) 3/8-drive hex bit sizes from 5/32 to 3/8
(6) 3/8-drive hex bit sizes from 4 to 8 plus 10
(3) 3/8-drive slotted screwdriver bits from 7/32 to 3/8
(3) 3/8-drive Phillips screwdriver bits from P1 to P3
(6) 3/8-drive Torx screwdriver bits from T27 to T50 including T47
(4) external torx sockets from E10 to E16

1/4-drive thin-profile ratchet (Craftsman 44994)
3/8-drive thin-profile ratchet (Craftsman 44995)
3/8-drive stubby flex-head ratchet (Craftsman 44834)
3/8-drive offset flex-head ratchet (Craftsman 44835)
1/2-drive thin-profile ratchet (Craftsman 44996)
1/2-drive X 15-inch flex handle/breaker bar (Craftsman 44201)
1-1/2-inch extension bar, 1/4-drive (Craftsman 43538)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)

1/4-drive to 3/8 socket adapter (Craftsman 04257)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
3/8-drive to 1/2 socket adapter (Craftsman 04258)
1/4-drive universal joint (Craftsman 04280)
3/8-drive universal joint (Craftsman 04435)
1/2-drive universal joint (Craftsman 04425)

This tool organizer was designed to fit tools that don't have "USA" markings.

This organizer is designed to fit a toolbox drawer with inner dimensions of:

22-1/4 X 16-1/4 inches
(inside width by inside length)

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.

Made in the USA!

Foam Organizer for 5 Craftsman Ratchets, 15 Drive Accessories, and 39 Sockets

Note: tools are not included

FoamFit Tools section divider


Please verify this organizer fits your tools before placing an order.

  1. Download the drawing:
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider