Fits (6) ratchets, (4) flex handles, (21) extensions, and (3) universal joints.
Accommodates the ratchets, flex handles, extensions, and universal joints from the Craftsman 903-pc set 21470.
Drawer Size
22-1/4 X 16-1/4 inches
$55.20
larger image
note: tools are not included
Precision CNC-cut to fit 34 Craftsman drive tools:
1/4-drive thin-profile 84-tooth ratchet (Craftsman 44994)
3/8-drive thin-profile 84-tooth ratchet (Craftsman 44995)
1/2-drive thin-profile 84-tooth ratchet (Craftsman 44996)
3/8-drive flex ratchet (Craftsman 44815)
3/8-drive stubby flex ratchet (Craftsman 44834)
3/8-drive offset flex ratchet (Craftsman 44835)
1/4-drive 6-inch flex handle/breaker bar (Craftsman 43523)
3/8-drive 10-inch flex handle/breaker bar (Craftsman 44363)
1/2-drive 15-inch flex handle/breaker bar (Craftsman 44201)
1/2-drive 18-inch flex handle/breaker bar (Craftsman 44202)
1/4-drive X 1-1/2 extension bar (Craftsman 43538)
1/4-drive X 3 extension bar (Craftsman 43539)
1/4-drive X 6 extension bar (Craftsman 43531)
1/4-drive X 14 extension bar (Craftsman 43532)
3/8-drive X 1-1/2 extension bar (Craftsman 43537)
3/8-drive X 3 extension bar (Craftsman 44264)
3/8-drive X 6 extension bar (Craftsman 44261)
3/8-drive X 10 extension bar (Craftsman 44262)
1/2-drive X 2 extension bar (Craftsman 43522)
1/2-drive X 3 extension bar (Craftsman 44133)
1/2-drive X 6 extension bar (Craftsman 44131)
1/2-drive X 10 extension bar (Craftsman 44132)
1/4-drive X 3 locking extension bar (Craftsman 44346)
1/4-drive X 6 locking extension bar (Craftsman 44347)
3/8-drive X 3 locking extension bar (Craftsman 44356)
3/8-drive X 6 locking extension bar (Craftsman 44357)
1/4-drive X 1-1/2 wobble extension bar (Craftsman 43177)
3/8-drive X 1-1/2 wobble extension bar (Craftsman 44282)
3/8-drive X 3 wobble extension bar (Craftsman 44283)
3/8-drive X 6 wobble extension bar (Craftsman 44286)
3/8-drive X 10 wobble extension bar (Craftsman 44287)
1/2-drive universal joint (Craftsman 4425)
3/8-drive universal joint (Craftsman 4435)
1/4-drive universal joint (Craftsman 4280)
This tool organizer was designed to fit the ratchets, flex handles, extensions, and universal joints from the Craftsman 903-pc set 21470. The pockets are sized to fit tools that don't have "USA" markings.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
22-1/4 X 16-1/4 inches (inside width by inside depth)
Works in most drawers, needing no more than 2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
21-3/4 X 16 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.