Fits (3) ratchets,
(13) extensions,
(5) adapters,
and (3) universal joints.
Accommodates a non-USA version of the 21-pc Craftsman drive tool accessory set with model number 42283.
Also accommodates the 3-pc Craftsman thin-profile ratchet set 44992.
Caution: See note about changes to these tools.
Drawer Size
22-1/4 X 10-5/8 inches
$42.60
larger image
note: tools are not included
Precision CNC-cut to fit 24 Craftsman tools:
1/2-drive thin-profile 84-tooth ratchet (Craftsman 44996)
3/8-drive thin-profile 84-tooth ratchet (Craftsman 44995)
1/4-drive thin-profile 84-tooth ratchet (Craftsman 44994)
1/2-drive to 3/4 socket adapter (Craftsman 04271)
1/2-drive to 3/8 socket adapter (Craftsman 04259)
3/8-drive to 1/2 socket adapter (Craftsman 04258)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
1/4-drive to 3/8 socket adapter (Craftsman 04257)
1/2-drive universal joint (Craftsman 04425)
3/8-drive universal joint (Craftsman 04435)
1/4-drive universal joint (Craftsman 04280)
2-inch extension bar, 1/2-drive (Craftsman 43522)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)
10-inch extension bar, 1/2-drive (Craftsman 44132)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
10-inch extension bar, 3/8-drive (Craftsman 44262)
20-inch extension bar, 3/8-drive (Craftsman 44263)
1-1/2-inch extension bar, 1/4-drive (Craftsman 43538)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)
14-inch extension bar, 1/4-drive (Craftsman 43532)
This tool organizer was designed to fit the Craftsman 21-pc drive tool accessory set 42283 plus 3 ratchets from set 44992. The pockets may not fit older tools, and may not fit the newest version of these tools. The newer version of the 21-pc set has a model number starting with "CMMT". Over time, the swivels have changed length and some of the adapters have changed diameter.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
22-1/4 X 10-5/8 inches (inside width by inside depth)
Works in most drawers, needing no more than 2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
21-3/4 X 10-3/8 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.