FoamFit Tools section divider

Foam Tool Organizer for
10 Craftsman Pliers

see all organizers for Craftsman pliers


10 Craftsman Pliers

Fits (8) solid joint pliers from set 50494,
6-3/4 inch slip joint pliers,
and 9-1/2 inch arc joint pliers.

Drawer Size
22-1/4 X 14-1/2 inches


FoamFit Tools section divider


This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 10 Craftsman pliers:

8 inch duck bill (Craftsman 45087)
8 inch long reach (Craftsman 45085)
8 inch long nose (Craftsman 45103)
6 inch long nose (Craftsman 45102)
6-1/2 inch bent nose (Craftsman 45104)
6-3/4 inch slip joint pliers (Craftsman 45378)
9-1/2 inch arc joint pliers (Craftsman 45381)
6 inch diagonal cutter (Craftsman 45075)
7 inch diagonal cutter (Craftsman 45076)
7 inch linesman (Craftsman 45093)

The pliers listed above are available as Craftsman 8-piece set 50494, plus 6-3/4-inch slip-joint pliers 45378 and 9-1/2-inch arc-joint pliers 45381.

This organizer is designed to fit a standard Craftsman toolbox drawer with inner dimensions of:

22-1/4 X 14-1/2 inches
(inside width by inside length)

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.

Made in the USA!


Note: tools are not included

FoamFit Tools section divider


Please verify this organizer fits your tools before placing an order.

  1. Download the drawing:
  2. Print the pages of the drawing full size (page scaling = none).
  3. Assemble the pages and place the printed drawing in your toolbox drawer.
  4. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider