4 Craftsman Ratchets with 23 Drive Tools
Fits (3) quick release ratchets,
(1) 3/8 flex head ratchet,
(2) spinner handles,
(3) flex handles,
and (11) extensions.
Accommodates the ratchets and drive accessories from version 1 of the Craftsman 540-piece mechanics tool set 36540.
22-1/4 X 16-1/4 inches
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 4 Craftsman ratchets and 23 drive accessories:
1/2-drive quick-release teardrop ratchet (Craftsman 44809)
1/2-drive 15-inch flex handle/breaker bar (Craftsman 44201)
3/8-drive quick release long teardrop ratchet (Craftsman 44808)
3/8-drive quick-release flex head teardrop ratchet (Craftsman 44815)
3/8-drive 10-inch flex handle/breaker bar (Craftsman 44363)
1/4-drive quick-release teardrop ratchet (Craftsman 44807)
1/4-drive 6-inch spinner handle (Craftsman 43372)
1/4-drive 4-1/2 inch spinner handle (Craftsman 43351)
1/4-drive 6-inch flex handle/breaker bar (Craftsman 43523)
1/2-drive to 3/8 socket adapter (Craftsman 04259)
3/8-drive to 1/2 socket adapter (Craftsman 04258)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
1/4-drive to 3/8 socket adapter (Craftsman 04257)
1/2-drive universal joint (Craftsman 04425)
3/8-drive universal joint (Craftsman 04435)
1/4-drive universal joint (Craftsman 04280)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)
10-inch extension bar, 1/2-drive (Craftsman 44132)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
10-inch extension bar, 3/8-drive (Craftsman 44262)
1-1/2-inch extension bar, 1/4-drive (Craftsman 43538)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)
14-inch extension bar, 1/4-drive (Craftsman 43532)
This tool organizer was designed to fit the ratchets and drive accessories from version 1 of the Craftsman 540-piece set (see Craftsman 36540). The pockets are sized to fit older tools that have "USA" markings.
22-1/4 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 21-3/4 X 15-1/4 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.