Foam Tool Organizer for
39 Craftsman Hex Bit and Torx Sockets with 3 Ratchets and 15 Drive Tools

Overview

39 Craftsman Hex Bit and Torx Sockets with 3 Ratchets and 15 Drive Tools

Fits (3) ratchets, (8) extensions, (3) adapters, (3) universal joints, (1) flex handle, (17) hex bit sockets, (16) torx sockets, and (6) screwdriver bit sockets.

Only fits newer tools without USA markings.

Drawer Size
22-1/4 X 14-1/2 inches

$49.80



Foam Organizer for 39 Craftsman Hex Bit and Torx Sockets with 3 Ratchets and 15 Drive Tools

larger image

Foam Organizer for 39 Craftsman Hex Bit and Torx Sockets with 3 Ratchets and 15 Drive Tools

larger image

note: tools are not included

Tool List

Precision CNC-cut to fit 57 Craftsman sockets and drive tools:

(5) 1/4-drive hex bit sizes from 3/16 to 3/8
(3) 1/4-drive Torx screwdriver bits from T15 to T25
(3) external torx sockets from E6 to E8
(6) 3/8-drive hex bit sizes from 5/32 to 3/8
(6) 3/8-drive hex bit sizes from 4 to 8 plus 10
(3) 3/8-drive slotted screwdriver bits from 7/32 to 3/8
(3) 3/8-drive Phillips screwdriver bits from P1 to P3
(6) 3/8-drive Torx screwdriver bits from T27 to T50 including T47
(4) external torx sockets from E10 to E16

1/4-drive thin-profile ratchet (Craftsman 44994)
3/8-drive thin-profile ratchet (Craftsman 44995)
1/2-drive thin-profile ratchet (Craftsman 44996)
1/2-drive X 15-inch flex handle/breaker bar (Craftsman 44201)
1-1/2-inch extension bar, 1/4-drive (Craftsman 43538)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)

1/4-drive to 3/8 socket adapter (Craftsman 04257)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
3/8-drive to 1/2 socket adapter (Craftsman 04258)
1/4-drive universal joint (Craftsman 04280)
3/8-drive universal joint (Craftsman 04435)
1/2-drive universal joint (Craftsman 04425)

Tool Notes

This tool organizer was designed to fit tools that don't have "USA" markings.

Drawing

Drawing F-02753-R.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

22-1/4 X 14-1/2 inches (inside width by inside depth)

Drawer Height

Works in most drawers, needing no more than 2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

21 X 14-1/4 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

Standard Colors

black over red color combination blue over yellow color combination black over blue color combination

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

black over yellow color combination black over green color combination black over gray color combination

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.

Free Shipping!

For orders within the contiguous 48 US states.

US flag

Made in the USA!