50 Husky 1/2-drive Sockets with 2 Ratchets and 6 Drive Tools
Fits (23) inch sockets, (27) metric sockets, (2) 1/2-drive ratchets, (3) extensions, drive adapter, flex handle, and swivel.
Accommodates the 1/2-drive sockets and drive tools from the Husky 432-pc set H432MTS.
Available Drawer Sizes:
20-3/8 X 15-11/16, $42.70
20-1/2 X 15-3/4, $43.00
21-1/2 X 15-3/4, $44.20
25-3/4 X 15-7/8, $52.50
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 58 Husky sockets and other tools:
(12) 1/2-drive 12-point sizes from 3/8 to 1-1/16
(11) 1/2-drive 12-point deep sizes from 3/8 to 1
(14) 1/2-drive 12-point sizes from 9 to 22
(13) 1/2-drive 12-point deep sizes from 9 to 19 plus 21 and 22
1/2-drive full-polish quick-release ratchet
1/2-drive full-polish flex-head ratchet
1/2-drive X 3 extension bar
1/2-drive X 5 extension bar
1/2-drive X 10 wobble extension bar
1/2-drive X 15 flex handle (breaker bar)
1/2-drive to 3/8-drive adapter
1/2-drive universal joint
This tool organizer was designed to fit the 1/2-drive sockets, ratchets, and drive tools from the Husky 432-pc set H432MTS.
Four standard sizes are available (see below for measurements).
It is possible to trim these organizers to fit a smaller drawer. The minimum recommended size for these four layouts is 20-1/8 X 15-1/4 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
|tool organizer drawings|
|20-3/8 X 15-11/16 inches||F-02508-R1||F-02508-R2||F-02508-R3|
|20-1/2 X 15-3/4 inches||F-02509-R1||F-02509-R2||F-02509-R3|
|21-1/2 X 15-3/4 inches||F-02510-R1||F-02510-R2||F-02510-R3|
|25-3/4 X 15-7/8 inches||F-02511-R1||F-02511-R2||F-02511-R3|
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.