FoamFit Tools section divider

Foam Tool Organizer for
3 Craftsman Ratchets with Drive Tools and 8 Screwdrivers, Fits non-USA Ratchets

see all organizers for Craftsman ratchets and drive tools

Overview

3 Craftsman Ratchets with Drive Tools and 8 Screwdrivers, Fits non-USA Ratchets

Fits (3) thin profile ratchets,
(1) spinner handle,
(3) u-joints,
(4) adapters,
(8) extensions,
(4) slotted screwdrivers,
(4) Phillips screwdrivers,
(1) magnetic handle,
and (22) magnetic bits.

Accommodates the ratchets, drive accessories, and screwdrivers from the Craftsman 500-piece mechanics tool set 34500.

New!

Drawer Size
22-1/4 X 16-1/4 inches

$40.00



FoamFit Tools section divider

Details

This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 3 Craftsman ratchets and additional tools:

1/2-drive thin-profile ratchet (Craftsman 44996)
3/8-drive thin-profile ratchet (Craftsman 44995)
1/4-drive thin-profile ratchet (Craftsman 44994)
1/4-drive 6-inch spinner handle (Craftsman 43372)
1/2-drive to 3/8 socket adapter (Craftsman 04259)
3/8-drive to 1/2 socket adapter (Craftsman 04258)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
1/4-drive to 3/8 socket adapter (Craftsman 04257)
1/2-drive universal joint (Craftsman 04425)
3/8-drive universal joint (Craftsman 04435)
1/4-drive universal joint (Craftsman 04280)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
1-1/2-inch extension bar, 1/4-drive (Craftsman 43538)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)

slotted screwdrivers:
1/8 X 4, 3/16 X 4, 1/4 X 1-1/2, 1/4 X 6

Phillips screwdrivers:
P0 X 2-1/2, P1 X 3, P2 X 1-1/2, P2 X 4

This tool organizer was designed to fit the ratchets, drive accessories, and screwdrivers from the Craftsman 500-piece set 34500. The pockets for the ratchets and drive accessories are sized to fit tools that don't have "USA" markings.

This organizer is designed to fit a standard Craftsman toolbox drawer with inner dimensions of:

22-1/4 X 16-1/4 inches
(inside width by inside length)

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.



Made in the USA!

Foam

Note: tools are not included

FoamFit Tools section divider

Drawing

Please verify this organizer fits your tools before placing an order.

  1. Download the drawing: www.FoamFitTools.com/product/F1M-01438.pdf
  2. Print the pages of the drawing full size (page scaling = none).
  3. Assemble the pages and place the printed drawing in your toolbox drawer.
  4. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider